Dwyer differential pressure switch 1950-00-2F

Dwyer differential pressure switch 1950-00-2F

Dwyer Differential Pressure Switch 1950 Series

Explosion proof micro differential pressure switch

Small size, low price, explosion-proof, all-weather protection type

The 1950 explosion-proof differential pressure switch combines all the performance of the 1900 series differential pressure switch, and is equipped with explosion-proof or all-weather protective casing, making it more widely used and of higher application value. It has CE, UL, CSA, and FM certifications, with explosion-proof levels of Class I, Div 1, Groups C and D, Class II Groups E, F, and G, and Class III hazardous atmospheres NEMA 7&9 Raintight NEMA 3 (IP54). The all-weather protective casing is equipped with drainage plugs and O-ring seals, making it easy to connect wires by opening the front cover plate. The set point can be adjusted outside the protective casing. There are 12 models to choose from, ranging from 0.03 “to 220” inches of water column (7.5 to 5000PA) and from 0.5 to 50psi (0.035 to 3.5Bar). The 1950 explosion-proof differential pressure switch has a small volume and light weight, which is half the size and weight of other explosion-proof switches.

Warning: Can only be used with air or compatible gases. When used in hazardous situations and under single positive pressure, special ventilation and exhaust must be carried out.

Technical indicators

Media: Air and non flammable, compatible with gases

Material: Please consult the manufacturer

Temperature range: For -40 to 140 ° F (-40 to 60 ° C), 0 to 140 ° F (-17.8 to 60 ° C) for 1950P-8, 15, 25, and 50- 30 to 130 ° F (-34.4 to 54.4 ° C) for 1950-02

Pressure range: Continuous: 1950’s – 45 ˝ w. C. (0.11 bar); 1950P’s -35 psi (2.41 bar); 1950P-50 only -70 psi (4.83 bar)

Impact pressure: 1950’s -10 psi (0.69 bar) 1950P’s -50 psi (3.45 bar) 1950P-50 only -90 psi (6.21 bar)

Protection indicators: IP64, NEMA 3, 7, and 9

Switch type: Single Pole Double Throw (SPDT)

Electrical indicators: 15 A @, 125250480 VAC, 60Hz Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz

Electrical connection: 3 twisted wire ends, general, normally open, normally closed

Connection: 1/8 ˝ NPT internal thread

Installation positioning: The diaphragm is used in the vertical direction. For other positioning, please consult the manufacturer

Set point adjustment: Adjust the screw at the top of the casing

Weight: 3.25 Ib (1.5 kg), 1950-02 type, 4.4 lb (2 kg)

Institutional certification: CE, UL, CSA, FM

笔记

Dwyer差压开关1950-00-2F

Dwyer差压开关1950系列
防爆型微差压开关
尺寸小，价格低，防爆，全天候防护型
1950型防爆差压开关综合了1900系列差压开关的所有性能，再配备防爆或全天候的防护外壳，使其应用更加广泛，应用价值也更高。它有CE,UL和CSA，FM认证，防爆级别为Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres NEMA 7 & 9. Raintight NEMA 3 (IP54)。全天候防护外壳上带有排水堵头和O型环密封，打开前盖板就能很容易接线。可在防护外壳的外面调整设定点。有12种型号供选择，从0.03＂到220＂英寸水柱（7.5到5000PA）和从0.5到50psi（0.035到3.5Bar）。1950型防爆差压开关体积小，重量轻，体积和重量相当于其它防爆开关的一半。
警告：只能用于空气或兼容气体。当在危险场合和单正压的情况下使用时，必需进行特殊的通风排气。
技术指标
介质：空气和不易燃，兼容气体
材质：请向厂家咨询
温度范围：对于-40至140°F（-40至60°C），0至140°F（-17.8至60°C）对于1950P-8，15，25和50。-30至130°F（-34.4至54.4°C）对于1950-02.
压力范围：持续：1950’s – 45˝  w.c.（0.11 bar）；1950P’s – 35 psi（2.41 bar）；1950P-50 only -70 psi（4.83 bar）
冲击压力：1950’s – 10 psi（0.69 bar）1950P’s- 50 psi（3.45 bar）1950P-50 only – 90 psi（6.21 bar）
防护指标：IP64，NEMA 3，7和9
开关类型：单刀双掷 （SPDT）
电气指标：15 A @，125，250，480 VAC，60Hz. Resistive  1/8 HP @ 125 VAC，1/4 HP @250 VAC，60 Hz
电气连接：3个旋紧接线端，一般，常开，常闭
连接件：1/8˝ NPT内螺纹
安装定位：膜片用于垂直方向，其它定位请向厂家咨询
设定点调节：调节螺丝在外壳顶部
重量：3.25 Ib（1.5 kg），1950-02型，4.4 lb（2 kg）
机构认证：CE，UL，CSA，FM