Dwyer Temperature Switch HS Series

Dwyer Temperature Switch HS Series

Humidity switch

Programmable settings, 3-digit display

The HS series humidity switch adopts micro processing technology to control humidification or dehumidification. The bright green LED displays humidity, output status, and fault error information. It has 9 preset parameters for users to choose from, including: set point value, hysteresis time, control type, cycle period, probe adjustment, etc. Programming configuration with password protected buttons. The HS series also comes with card components for panel installation, sealing strips, wiring board back cover, and operation manual.

Attachment:

THC-P – humidity probe with 3V output and 4 ‘(1.2 meters) cable.

model

Model input sensor power supply voltage

HS-311 0-3V 110VAC

HS-312 0-3V 230VAC

HS-111 0-1V 110VAC

HS-112 0-1V 230VAC

HS-411 4-20mA 110VAC

HS-412 4-20mA 230VAC

attachment

THC-P humidity probe, 0 to 3V output, 4ft (1.5m) cable

Dwyer温度开关 HS系列
湿度开关
可编程设置，3位数显 
HS系列 湿度开关采用了微处理技术，用于控制加湿或除湿。明亮的绿色LED显示湿度，输出状态和故障错误信息。它有9中预设的参数供用户选择，包括：设定点值，滞后时间见，控制类型，循环周期，探头调整等。带密码保护按键保护编程配置。HS系列还带有盘面安装用的卡件，密封条，接线板后盖和操作手册。
附件：
THC-P  – 具有3V输出和4’（1.2米）电缆的湿度探头。

型号

附件

THC-P 湿度探针，0到3V输出，4ft (1.5m)电缆

参数